We used this stuff on an entire utility trailer. Worked great. We coated
the whole freaking trailer with "Duro Extend", then we painted it black.
Some years later, Locktite bought the company. I think it is still the
same product. It does not remove rust, it converts it chemically.
https://www.amazon.com/Loctite-75430-Extend-Treatment-Drying/dp/B001HWA8WU
bp
<part15sbs{at}gmail{dot}com>
On 7/26/2018 7:18 AM, [email protected] wrote:
I really don’t want to back out tight sheet metal screws. They may be
rusted in but even if they are not, they never go in as tight and
secure the second time. Plus I think it is more work than just
hitting them all with a shot of paint.
I had to remove the rust stains no matter what.
*From:* Jason McKemie
*Sent:* Wednesday, July 25, 2018 10:59 PM
*To:* AnimalFarm Microwave Users Group
*Subject:* Re: [AFMUG] OT New YouTube Video
Is it not possible to just back the screws out and replace them with
something stainless or galvanized?
On Wednesday, July 25, 2018, Chuck McCown <[email protected]> wrote:
A bit off topic, but I figured while I was solving the problem, I
may as well share.
https://youtu.be/ECauzd4bIlM
------------------------------------------------------------------------
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
