I would just make a coil, perhaps 18-24 inches in diameter. Secure it with clips and zip ties.
From: Jay Weekley Sent: Monday, August 20, 2018 9:50 AM To: AnimalFarm Microwave Users Group ; Principal WISPA Member List Subject: [AFMUG] Fiber optic slack/cable management I need advice. We are providing a backup connection to a local bank. We ran pre-terminated fiber from a wireless link to where their primary connection is. From there an existing fiber link runs to their server room inside the bank. The problem is that I ordered way too much fiber and have about 30 feet of slack to work with. Attached is a picture of the back board I'm going to work with. The fiber is circled at the top of the picture and the splice case is circled toward the lower right. How would you route the cable and secure it to the back board as well as manage that much slack? At this point trimming and reterminating is not an option. -- Jay Weekley Cyber Broadband -------------------------------------------------------------------------------- -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
