Coil up your slack in ceiling rafters using smurf tube and some velcro
strapping. I had some that got over ordered on a tower like a 100' of it.
We made a tray to hang a few inch from ceiling about 3' across to house
all the access. looked good but frustrating to say the least.
On 8/20/2018 10:50 AM, Jay Weekley wrote:
I need advice. We are providing a backup connection to a local bank.
We ran pre-terminated fiber from a wireless link to where their
primary connection is. From there an existing fiber link runs to their
server room inside the bank. The problem is that I ordered way too
much fiber and have about 30 feet of slack to work with. Attached is a
picture of the back board I'm going to work with. The fiber is circled
at the top of the picture and the splice case is circled toward the
lower right. How would you route the cable and secure it to the back
board as well as manage that much slack? At this point trimming and
reterminating is not an option.
--
*Jay Weekley*
*Cyber Broadband
*
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
