Ug. I have a moratorium against any HF stuff unless it is a one time use situation... I am sure some of it is OK but it has historically been pretty bad.
From: Forrest Christian (List Account) Sent: Monday, August 20, 2018 2:23 PM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] OT Nice tool boxes I'm not sure if this is really a recommendation, but: I have a couple of the Harbor Freight toolboxes which have proven to be very serviceable for my needs. They also are very highly regarded in the online forums, unlike much of the other stuff HF sells. On Sun, Aug 19, 2018 at 9:03 AM, Chuck McCown <[email protected]> wrote: I need a larger tool box for my shop. I have several nice Kennedy boxes but they are not suitable for larger mechanics tools. So looking for a nice used box. Snap On, MAC, Mattco etc. In Utah, we have KSL classifieds. Generally bargains can be found there. So I did some data entry. I also checked Ebay. I found that nice high quality tool boxes run from 2 cents to 12 cents per cubic inch. Ebay is higher than KSL. Matco was about at the top for price, Mac and Cornwall were in the middle, Pro Series (they claim to be a Snap On competitor) were at the bottom. Snap Ons were scattered through the whole spread sheet. I currently have 21 entries. Lowest cost is $990 Highest $8000 I did not include Husky or any of the bargain brands. -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- Forrest Christian CEO, PacketFlux Technologies, Inc. Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 [email protected] | http://www.packetflux.com -------------------------------------------------------------------------------- -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
