I'm pretty sure I can get the dual pol feeds for the dishes, I'm just not sure what else is necessary to bolt your adapter to the Valuline dish. Does it just go in place of the dragonwave transition kit?
On Thursday, August 23, 2018, Chuck McCown <[email protected]> wrote: > The problem would be either converting to a circular feed or only using > one polarity. > > *From:* Jason McKemie > *Sent:* Thursday, August 23, 2018 11:43 AM > *To:* AnimalFarm Microwave Users Group > *Subject:* Re: [AFMUG] AF11 to Valuline adapter > > I'm looking at picking up some surplus Valuline antennas that are > currently set up for single pol dragonwave. > > On Thursday, August 23, 2018, Chuck McCown <[email protected]> wrote: > >> I guess it depends on what you have on the antenna. Can you send me a >> photo? >> >> *From:* Jason McKemie >> *Sent:* Thursday, August 23, 2018 9:29 AM >> *To:* AnimalFarm Microwave Users Group >> *Subject:* [AFMUG] AF11 to Valuline adapter >> >> Chuck - >> >> What interface on the antenna is necessary? I'm looking at converting a >> couple single pol Valuline antennas to dual pol and am wondering if a new >> feed is the only part I need - I also assume I will not be needing the >> transition kit since the radios will be different than what was originally >> spec'd for the antennas. >> ------------------------------ >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > ------------------------------ > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
