All the valueline are cylinder tube feed horns and have an adapter on
the end that ether attaches an OMT vendor specific direct mount or dual
ubr interface. Chuck if it would help I would be willing to send you
some VHLP 2' dishes.
On 8/24/2018 4:08 AM, Eric Kuhnke wrote:
The af11 to jirous dish adapter is a cylindrical tube, if you have
valuline single pole dishes they are likely rectangular waveguide and
feed, so such a thing wouldn't work. Are you planning to do af11 SISO?
On Thu, Aug 23, 2018, 8:31 AM Jason McKemie
<[email protected]
<mailto:[email protected]>> wrote:
Chuck -
What interface on the antenna is necessary? I'm looking at
converting a couple single pol Valuline antennas to dual pol and
am wondering if a new feed is the only part I need - I also assume
I will not be needing the transition kit since the radios will be
different than what was originally spec'd for the antennas.
--
AF mailing list
[email protected] <mailto:[email protected]>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
Trey Scarborough
VP Engineering
3DS Communications LLC
p:9729741539
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
