Yes it would help. Only need one. I am shipping limited amounts of Remec adapters, I have Dragonwave and Valueline ready to manufacturer but was having some quality issues on my deep bores. I have switched from boring bars to spade drills in the hopes of curing that problem.
It would not be a problem if the whole world standard on a diameter for 11 GHz circular feedhorn, but they all picked something different. .714” .750” .777” etc. From: Trey Scarborough Sent: Friday, August 24, 2018 7:10 AM To: [email protected] Subject: Re: [AFMUG] AF11 to Valuline adapter All the valueline are cylinder tube feed horns and have an adapter on the end that ether attaches an OMT vendor specific direct mount or dual ubr interface. Chuck if it would help I would be willing to send you some VHLP 2' dishes. On 8/24/2018 4:08 AM, Eric Kuhnke wrote: The af11 to jirous dish adapter is a cylindrical tube, if you have valuline single pole dishes they are likely rectangular waveguide and feed, so such a thing wouldn't work. Are you planning to do af11 SISO? On Thu, Aug 23, 2018, 8:31 AM Jason McKemie <[email protected]> wrote: Chuck - What interface on the antenna is necessary? I'm looking at converting a couple single pol Valuline antennas to dual pol and am wondering if a new feed is the only part I need - I also assume I will not be needing the transition kit since the radios will be different than what was originally spec'd for the antennas. -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- Trey Scarborough VP Engineering 3DS Communications LLC p:9729741539 -------------------------------------------------------------------------------- -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
