10 foot tall wooden poles for an aerial attachment only need to be set maybe
4 feet deep.
Or are you talking about elevated supports for guy wires?
If so, you probably need to dig a trench for an L shaped sleeper and the
some rebar in sonotube for the poles and anchors.
-----Original Message-----
From: Craig House
Sent: Saturday, September 29, 2018 12:55 PM
To: [email protected]
Subject: [AFMUG] Anchor holes
I have a tower construction location which is going to require 10 foot poles
above ground as an attachment point for the wires at each of the holes. I
have the pipes constructed but I’m concerned about being able to drill the
holes in our soil and ground to accommodate the pipes. Has anyone done
something like this before I’m not looking to do typical anchor holes that
are 6 feet or 8 feet wide and a foot and a half across I’m looking for an
auger hole that is a straight 6 to 7 feet down
Sent from my iPhone
Sent from my iPhone
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
