Can you tell me what an L shaped sleeper is. I’m not familiar with the term
Sent from my iPhone > On Sep 29, 2018, at 15:17, Craig House <[email protected]> wrote: > > Yes. Elevated guy supports. The location is an atv off road ranch and they > are worried about people getting clothes lined. > > Sent from my iPhone > > > On Sep 29, 2018, at 15:05, <[email protected]> <[email protected]> wrote: > > > > 10 foot tall wooden poles for an aerial attachment only need to be set > > maybe > > 4 feet deep. > > > > Or are you talking about elevated supports for guy wires? > > If so, you probably need to dig a trench for an L shaped sleeper and the > > some rebar in sonotube for the poles and anchors. > > > > -----Original Message----- > > From: Craig House > > Sent: Saturday, September 29, 2018 12:55 PM > > To: [email protected] > > Subject: [AFMUG] Anchor holes > > > > > > I have a tower construction location which is going to require 10 foot > > poles > > above ground as an attachment point for the wires at each of the holes. I > > have the pipes constructed but I’m concerned about being able to drill the > > holes in our soil and ground to accommodate the pipes. Has anyone done > > something like this before I’m not looking to do typical anchor holes that > > are 6 feet or 8 feet wide and a foot and a half across I’m looking for an > > auger hole that is a straight 6 to 7 feet down > > > > Sent from my iPhone > > Sent from my iPhone > > -- > > AF mailing list > > [email protected] > > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > > > > -- > > AF mailing list > > [email protected] > > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
