I've been using a Werner work platform. They're actually made to stand on, but provide me with some work space. Various manufacturers make ladder-mount splicing workstations, most are outrageously expensive though.
On Mon, Dec 3, 2018 at 5:09 PM Adam Moffett <[email protected]> wrote: > Do you mount a work table on the ladder? > > On 12/3/2018 5:39 PM, Jason McKemie wrote: > > I have several locations that I splice from a ladder on a pole. It isn't > my favorite way to do things, but it is workable. If you're going to need > to do it in inclement weather, I would probably purchase a strand-mountable > ladder tent - providing steel strand is present. > > -Jason > > On Mon, Dec 3, 2018 at 3:54 PM Adam Moffett <[email protected]> wrote: > >> I'm looking at some rural places where for some reason the power company >> chose to run their pole line about 100 yards off the road behind the >> houses. >> >> I cannot drive a bucket truck to some of these places. Sometimes you'd >> be crushing a corn field to get there or other times it's brushy and >> untamed and you couldn't drive anything less than a forestry mulcher >> through it. >> >> How do you equip someone for fusion splicing out in the bush like that? >> If we build on this route, we'll have to be able to splice out there at >> some point. Do you clear a space on the ground and set up a tent or do >> you climb the pole and set up an aerial tent and lash a work table to >> the pole? >> >> -Adam >> >> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
