Right, but could you chuck that into a cordless drill and get a
reasonable outcome or would it have to go in a milling machine?
I guess I was picturing an end mill with a pilot bit, but I'm not sure
if that's not a thing.
-Adam
On 4/12/2019 4:00 PM, [email protected] wrote:
End mill.
*From:* Adam Moffett
*Sent:* Friday, April 12, 2019 1:57 PM
*To:* [email protected]
*Subject:* Re: [AFMUG] Extra Long SMA to U.FL Pigtails
Dang it.....that makes an angled countersink. You'd need a flat
bottom for the flange on the SMA bulkhead connector. At a glance I
thought the depth stop was the cutting edge. Never mind, I'm stupid.
I know nothing.
If there is such a thing as a countersink bit that makes a flat bottom
hole in metal then maybe that's a way to go, but it doesn't seem to be
a simple thing to find.
-Adam
On 4/12/2019 3:47 PM, Adam Moffett wrote:
Here you go. Countersink the hole with a bit like this. I should do
the googling before the answering next time.
https://www.toolstoday.com/v-13069-55294.html?msclkid=4669295c52711e4ddaec75ecb97ceb31&utm_source=bing&utm_medium=cpc&utm_campaign=NX_Shopping%20Campaign%20-%20Desktop&utm_term=4584757331455670&utm_content=Product%20Type%20-%20Desktop
On 4/12/2019 1:50 PM, [email protected] wrote:
Yes, the plate is nearly 4mm thick. I've seen these on radios before
so I know they exist but I just
can't seem to find them.
On Fri, Apr 12, 2019 at 1:48 PM Ken Hohhof <[email protected]> wrote:
The screw terminal you refer to is the threads on the SMA
bulkhead connector? I take it you’re mounting it on a thick
plate of some kind? Wow, that’s a lot of thread, good luck.
*From:* AF <[email protected]> *On Behalf Of
*[email protected]
*Sent:* Friday, April 12, 2019 12:22 PM
*To:* AnimalFarm Microwave Users Group <[email protected]>
*Subject:* [AFMUG] Extra Long SMA to U.FL Pigtails
I'm looking for an SMA to U.FL pigtail that has a longer screw
terminal. Most I've found
have ~14.5mm threads exposed, I'm looking for something closer
to 20mm.
I've search online but can't seem to find anything. Anyone know
of a source for this?
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
------------------------------------------------------------------------
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
