I hear it's not a big deal for those factory complexes in the People's
Republic to crank out custom parts. Like the plan building a radio
needs a special SMA connector, so they just call the plant down the road
that makes those and tell them and they'll make a couple thousand of them.
....I'm saying just because it exists doesn't mean you or I can buy it.
I wonder if there's an easy to way countersink the plate. It's easy if
you have a milling machine of course, but I wonder if there's some kind
of drill bit that would make a countersink just big enough for the
flange on your bulkhead connector. It would only have to be 3/8's wide
or so.
On 4/12/2019 1:50 PM, [email protected] wrote:
Yes, the plate is nearly 4mm thick. I've seen these on radios before
so I know they exist but I just
can't seem to find them.
On Fri, Apr 12, 2019 at 1:48 PM Ken Hohhof <[email protected]
<mailto:[email protected]>> wrote:
The screw terminal you refer to is the threads on the SMA bulkhead
connector? I take it you’re mounting it on a thick plate of some
kind? Wow, that’s a lot of thread, good luck.
*From:* AF <[email protected]
<mailto:[email protected]>> *On Behalf Of
*[email protected] <mailto:[email protected]>
*Sent:* Friday, April 12, 2019 12:22 PM
*To:* AnimalFarm Microwave Users Group <[email protected]
<mailto:[email protected]>>
*Subject:* [AFMUG] Extra Long SMA to U.FL Pigtails
I'm looking for an SMA to U.FL pigtail that has a longer screw
terminal. Most I've found
have ~14.5mm threads exposed, I'm looking for something closer to
20mm.
I've search online but can't seem to find anything. Anyone know of
a source for this?
--
AF mailing list
[email protected] <mailto:[email protected]>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
