Looks like z wave may be the way to go. It appears I will need some kind of
controller to get started.
Would like to find switches that do not have to be wired to anything that
will control other switches.
-----Original Message-----
From: Robert Andrews
Sent: Wednesday, June 12, 2019 9:57 AM
To: [email protected]
Subject: Re: [AFMUG] OT x10 zigbee etc
smarthome.com
On 06/12/2019 08:36 AM, [email protected] wrote:
I have three big assed swamp coolers that have their switches about 100’
away from our main light switch panel up front.
And I have a shop air control that is probably 50’ away from the same
spot. Like to just have those 4 switches remoted up to the same area as
all the light switches are. Just not familiar with the state of the art.
*From:* Jason McKemie
*Sent:* Wednesday, June 12, 2019 9:32 AM
*To:* AnimalFarm Microwave Users Group
*Subject:* Re: [AFMUG] OT x10 zigbee etc
You can do this with zwave and smartthings. I have a location in my house
that I control two separate circuits/lights with one switch. There are
tons of difference ways to set this stuff up.
-Jason
On Wed, Jun 12, 2019 at 10:28 AM <[email protected]> wrote:
I have several switches in my shop that I would like to move dozens
of feet but I am too lazy to do so.
Is X10 still a thing? Anyone know of a good method to RF remote a
normal light switch or power line carrier control it?
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
------------------------------------------------------------------------
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
