You can basically do this with smart things, I'm not even sure you need the hub in place for anything besides config for that functionality. The Jasco switches are what I use as well, make sure you get the newer one with double tap functions.
On Wednesday, June 12, 2019, <[email protected]> wrote: > Looking for a battery powered RF only add on switch. Have not found it > yet. > > -----Original Message----- From: Seth Mattinen > Sent: Wednesday, June 12, 2019 10:55 AM > To: [email protected] > Subject: Re: [AFMUG] OT x10 zigbee etc > > On 6/12/19 8:36 AM, [email protected] wrote: > >> I have three big assed swamp coolers that have their switches about 100’ >> away from our main light switch panel up front. >> And I have a shop air control that is probably 50’ away from the same >> spot. Like to just have those 4 switches remoted up to the same area as >> all the light switches are. Just not familiar with the state of the art. >> > > > Zigbee or Z Wave. > > A SmartThings hub is pretty turnkey. Used one until I got round to doing > my own thing with Home Assistant. > > I've been using these switches: > https://byjasco.com/products/category/smart-home-automation > > There's z-wave remote controls out there you should be able to tie in. > Never used a remote personally though. > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
