Not sure if I have ever seen stainless guys. They have all been galvanized in my experience.
From: Mathew Howard Sent: Wednesday, July 17, 2019 7:47 AM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] Best Practices Most of those things are a good idea, even if not completely necessary (a lot of it, like shielded cable, is necessary, in my opinion). Steel cable ties sound like a bad idea (assuming you're talking about the zip tie type... I imagine that would tend to cut through cables). If you've had problems with guy wires rusting, then I would probably look into stainless steel, but I think galvanized is generally fine... I'm certainly not an expert on that subject though. On Wed, Jul 17, 2019 at 1:31 AM Rhys Cuff (Latrobe IT) <[email protected]> wrote: Hi Guys I’m continually improving my 15 year old Wisp and had some questions.. Do you guys ground all your base radios? Do you use surge suppressors? Do you use shielded cable on the towers with metal ends? Do you put all your cable in conduit going up the tower? Do you use steel cable ties? Do you put some kind of grease or spray on the cat5 end before you set in place? Do you use stainless steel guy wires? My answer to all these is no ☹ but I figure if I’m rebuilding I should do it right the 5th time! Thanks very much for any idea’s Rhys -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com -------------------------------------------------------------------------------- -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
