Conduit should only be used on rooftops (cable trays can be expensive) and tower situations where heavy RF interference is leaking into the cable.

In an ideal world to run cable up the tower you do a cable ladder and cable blocks: https://www.sitepro1.com/store/cart.php?m=product_list&c=4

photograph      
Daniel White
Co-Founder - Business Development & Operations
phone: +1 (702) 470-2766
direct:+1 (702) 470-2770

Colin Stanners wrote on 7/17/19 08:12:
The only ones that I'd give a hard-no to are to cable in conduit going up the tower (would result in a lot of pull on the cables as they aren't attached for a very long distance; limits upgrade options) and the grease/spray on cat5 ends (unless you're at sea or very humid areas).

On Wed, Jul 17, 2019 at 8:48 AM Mathew Howard <[email protected] <mailto:[email protected]>> wrote:

    Most of those things are a good idea, even if not completely
    necessary (a lot of it, like shielded cable, is necessary, in my
    opinion).

    Steel cable ties sound like a bad idea (assuming you're talking
    about the zip tie type... I imagine that would tend to cut through
    cables).

    If you've had problems with guy wires rusting, then I would
    probably look into stainless steel, but I think galvanized is
    generally fine... I'm certainly not an expert on that subject though.

    On Wed, Jul 17, 2019 at 1:31 AM Rhys Cuff (Latrobe IT)
    <[email protected] <mailto:[email protected]>> wrote:

        Hi Guys

        I’m continually improving my 15 year old Wisp and had some
        questions..

        Do you guys ground all your base radios?

        Do you use surge suppressors?

        Do you use shielded cable on the towers with metal ends?

        Do you put all your cable in conduit going up the tower?

        Do you use steel cable ties?

        Do you put some kind of grease or spray on the cat5 end before
        you set in place?

        Do you use stainless steel guy wires?

        My answer to all these is no ☹  but I figure if I’m rebuilding
        I should do it right the 5^th time!

        Thanks very much for any idea’s

        Rhys

-- AF mailing list
        [email protected] <mailto:[email protected]>
        http://af.afmug.com/mailman/listinfo/af_af.afmug.com

-- AF mailing list
    [email protected] <mailto:[email protected]>
    http://af.afmug.com/mailman/listinfo/af_af.afmug.com




-- 
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to