Hmmm, if you do snmpwalk -v 2c -c <community> <IP> 1.3.6 what does the IF:MIB section show for ethernet ports?
I seldom get reasonable information from the cambium sections. -- Larry Smith [email protected] On Fri October 18 2019 11:32, Nate Burke wrote: > That's what I'm using, it's not being much help. Anything other than > cambiumEthRXBytes.0 is failing. > > On 10/18/2019 11:22 AM, Steve Jones wrote: > > probably have to add th eindex .1 .2 at the end > > ireasoning mib browser is excellent for finding all this out > > > > On Fri, Oct 18, 2019 at 10:53 AM Nate Burke <[email protected] > > <mailto:[email protected]>> wrote: > > > > I feel like I'm being stupid with SNMP. How do you monitor the 2 > > separate Ethernet ports on the old school EPMP1000 radios? > > > > The Cambium MIB only has a single Ethernet port listed in > > cambiumPerformanceMonitoring but in > > camibumpmp80211SystemConfiguration > > it has both lan and lan2 options. And I'm pretty sure that > > cambiumEthRXBytes is not actually either of the Ethernet > > interfaces, but > > the RF throughput. > > > > ifDescr lists 3 interfaces. 1 as Ethernet, 2 as RF, and 3 as > > Ethernet, > > but the Octet counts of 1 and 3 are equal. > > > > What am I missing? > > > > -- > > AF mailing list > > [email protected] <mailto:[email protected]> > > http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
