Id be curious what the attached device counters look like, are they the same also?
On Fri, Oct 18, 2019 at 12:21 PM Nate Burke <[email protected]> wrote: > I guess that makes sense, just make's my monitoring more complicated. > > I have 2 customers that are fed with 1 radio on a tree a ways out in the > yard. (Same owner of both houses, customers are renters) > > Customer 1 feeds POE to a 2.4 EPMP 1000 in AP mode on Ether 1. > Force 200 Feed Radio plugged into the 2.4 EPMP1000 on LAN 2 doing POE Out > Customer2 Connected to RF of 2.4 EPMP1000 Radio. > > I used to have a Tik at the tree, but the customer broke the NEMA with the > lawnmower, and decided the Tik could just sit on the ground. So I removed > the need for the NEMA by connecting it all this way. > > On 10/18/2019 12:11 PM, Steve Jones wrote: > > ahh, its a bridged interface, so even though its physical its treated as > one for counters for .1 and .3 There was another system i used to deal with > that did that, dont recall which, maybe tranzeo IIRC we never found a way > to differentiate. I wonder if CPE is in router mode if it does separate them > > On Fri, Oct 18, 2019 at 11:58 AM Nate Burke <[email protected]> wrote: > >> From Ireasoning MIB Browser. >> >> ifNumber.0 3 Integer 10.200.10.110:161 >> ifIndex.1 1 Integer 10.200.10.110:161 >> ifIndex.2 2 Integer 10.200.10.110:161 >> ifIndex.3 3 Integer 10.200.10.110:161 >> ifDescr.1 LAN interface 1 OctetString 10.200.10.110:161 >> ifDescr.2 WLAN interface OctetString 10.200.10.110:161 >> ifDescr.3 LAN interface 2 OctetString 10.200.10.110:161 >> ifType.1 ethernetCsmacd (6) Integer 10.200.10.110:161 >> ifType.2 ieee80211 (71) Integer 10.200.10.110:161 >> ifType.3 ethernetCsmacd (6) Integer 10.200.10.110:161 >> ifPhysAddress.1 00-04-56-D2-BD-A3 OctetString 10.200.10.110:161 >> ifPhysAddress.2 00-04-56-D2-BD-A4 OctetString 10.200.10.110:161 >> ifPhysAddress.3 00-04-56-D2-BD-A3 OctetString 10.200.10.110:161 >> ifInOctets.1 3776053896 Counter32 10.200.10.110:161 >> ifInOctets.2 4220530327 Counter32 10.200.10.110:161 >> ifInOctets.3 3776053896 Counter32 10.200.10.110:161 >> >> On 10/18/2019 11:48 AM, Larry Smith wrote: >> >> Hmmm, if you do snmpwalk -v 2c -c <community> <IP> 1.3.6 >> what does the IF:MIB section show for ethernet ports? >> >> I seldom get reasonable information from the cambium sections. >> >> >> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > > > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
