the counters on the two devices themselves that are attached, do they have the same numbers as the midpoint
On Fri, Oct 18, 2019 at 12:34 PM Nate Burke <[email protected]> wrote: > I'm not sure what you mean, Like the RF stats? > > On 10/18/2019 12:26 PM, Steve Jones wrote: > > Id be curious what the attached device counters look like, are they the > same also? > > On Fri, Oct 18, 2019 at 12:21 PM Nate Burke <[email protected]> wrote: > >> I guess that makes sense, just make's my monitoring more complicated. >> >> I have 2 customers that are fed with 1 radio on a tree a ways out in the >> yard. (Same owner of both houses, customers are renters) >> >> Customer 1 feeds POE to a 2.4 EPMP 1000 in AP mode on Ether 1. >> Force 200 Feed Radio plugged into the 2.4 EPMP1000 on LAN 2 doing POE Out >> Customer2 Connected to RF of 2.4 EPMP1000 Radio. >> >> I used to have a Tik at the tree, but the customer broke the NEMA with >> the lawnmower, and decided the Tik could just sit on the ground. So I >> removed the need for the NEMA by connecting it all this way. >> >> On 10/18/2019 12:11 PM, Steve Jones wrote: >> >> ahh, its a bridged interface, so even though its physical its treated as >> one for counters for .1 and .3 There was another system i used to deal with >> that did that, dont recall which, maybe tranzeo IIRC we never found a way >> to differentiate. I wonder if CPE is in router mode if it does separate them >> >> On Fri, Oct 18, 2019 at 11:58 AM Nate Burke <[email protected]> wrote: >> >>> From Ireasoning MIB Browser. >>> >>> ifNumber.0 3 Integer 10.200.10.110:161 >>> ifIndex.1 1 Integer 10.200.10.110:161 >>> ifIndex.2 2 Integer 10.200.10.110:161 >>> ifIndex.3 3 Integer 10.200.10.110:161 >>> ifDescr.1 LAN interface 1 OctetString 10.200.10.110:161 >>> ifDescr.2 WLAN interface OctetString 10.200.10.110:161 >>> ifDescr.3 LAN interface 2 OctetString 10.200.10.110:161 >>> ifType.1 ethernetCsmacd (6) Integer 10.200.10.110:161 >>> ifType.2 ieee80211 (71) Integer 10.200.10.110:161 >>> ifType.3 ethernetCsmacd (6) Integer 10.200.10.110:161 >>> ifPhysAddress.1 00-04-56-D2-BD-A3 OctetString 10.200.10.110:161 >>> ifPhysAddress.2 00-04-56-D2-BD-A4 OctetString 10.200.10.110:161 >>> ifPhysAddress.3 00-04-56-D2-BD-A3 OctetString 10.200.10.110:161 >>> ifInOctets.1 3776053896 Counter32 10.200.10.110:161 >>> ifInOctets.2 4220530327 Counter32 10.200.10.110:161 >>> ifInOctets.3 3776053896 Counter32 10.200.10.110:161 >>> >>> On 10/18/2019 11:48 AM, Larry Smith wrote: >>> >>> Hmmm, if you do snmpwalk -v 2c -c <community> <IP> 1.3.6 >>> what does the IF:MIB section show for ethernet ports? >>> >>> I seldom get reasonable information from the cambium sections. >>> >>> >>> >>> -- >>> AF mailing list >>> [email protected] >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >> >> >> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > > > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
