The FCC needs to know about pretty much anything beyond replacing a radio with the exact same model. I suspect that you couldn't actually run two AF11's on adjacent channels anyway...
On Wed, Jan 8, 2020 at 10:37 AM Kurt Fankhauser <[email protected]> wrote: > if you have an 80mhz channel and are running radios in 56mhz channel width > can u just put a 2nd link up and split them up to the two 40mhz? Does FCC > need to know about this or just do it? > > On Wed, Jan 8, 2020 at 10:38 AM Joe Novak <[email protected]> wrote: > >> There seems to be a lot of people complaining about getting stock of >> spare parts, and it has seemed to be on going for the last 6 months or so. >> Not something I would want to worry about. >> >> On Wed, Jan 8, 2020 at 9:26 AM Nate Burke <[email protected]> wrote: >> >>> We have several, about 2 dozen in place for about 2 years, Have not had >>> any issues with them. >>> >>> I like the fact that they are cheap enough to just keep spares on a >>> shelf. But so far we have not had any problems. Most of our Paths were >>> running AF5 radios that we upgraded to AF11, so we didn't even have to >>> change the bracket on the tower, just swap the AF5 for the AF11. >>> >>> We do change the mount bolts that come with the Dish. They are packed >>> with bolt/washer/lockwasher which is almost impossible to get all lined up >>> when you drop the dish into the bracket. We change them with serrated >>> flange head bolts like are on the AF5 radios (order from McMaster) and get >>> 35mm long threads so it's easier to line up on the bracket. We also have >>> have to re-tap about 80% of the mount holes on the dish because the threads >>> from the factory are that bad. That's just now part of our ground setup to >>> run the tap through all the holes. >>> >>> They have an option for 2wire power, or POE, but no SFP unfortunately. >>> But any Ethernet issues I've had can be traced to a problem with the >>> cable. >>> >>> On 1/8/2020 9:08 AM, Paul McCall wrote: >>> >>> Anybody have more than a couple of these thing in place for while that >>> can comment on their Pros / Cons ? >>> >>> >>> >>> Needing to buy 8 licensed links and looking for reliable, but cost >>> effective >>> >>> >>> >>> Paul >>> >>> >>> >>> *Paul McCall, President * >>> >>> *Florida Broadband / PDMNet* >>> >>> *658 Old Dixie Highway* >>> >>> *Vero Beach, FL 32962* >>> >>> *772-564-6800* >>> >>> >>> >>> >>> >>> -- >>> AF mailing list >>> [email protected] >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
