We have a few cmm5 in service and had absolutely no issues with them and
yes pricey for sure but havent went to a site for a cmm5 issue ever.
Cmm4 did what it was designed to do and we still have a couple in
service. If I had learned to ground them properly I would not of had to
replace any of them as with any
thing you put on a tower.
They were of course only 100baseT where CMM5 is GigE.
Ive been looking at chucks Gige APC gas tube surge arrestor for a new
project we have and looks like a good replacement for the APC444HV version.
I liked the CMM4 for its Outdoor verison and classy nema box that could
be mounted on a tower but cmm5 there isnt any way to do such unless the
box is
3'x3'x12" which is lil too big for my taste at 150' on a tower.
We pay close attention to what the cellcos are doing with their squid
and power/fiber distribution.
On 2/27/20 3:32 PM, Sean Heskett wrote:
CMM5 is worse than the CMM4.
and yes the control board for the CMM5 is a Pi
-sean
On Thu, Feb 27, 2020 at 12:44 PM Josh Baird <[email protected]
<mailto:[email protected]>> wrote:
Yes, the CMM4 was horrible. We still have a few as well.
On Thu, Feb 27, 2020 at 2:38 PM Steve Jones
<[email protected] <mailto:[email protected]>> wrote:
CMM Micro was pretty cool. We dropped the coin for a few CMM4
(still have one NIB) and were sorely disappointed in what a
shitshow it was of cobbled components at crazy high cost, half
web interface, half CLI, and IIRC there was java involved too.
I wont even look at a CMM5
On Thu, Feb 27, 2020 at 1:26 PM Josh Baird
<[email protected] <mailto:[email protected]>> wrote:
Was it the CMM5 that was basically a big metal box with a
tiny Raspberry Pi in it?
On Thu, Feb 27, 2020 at 2:21 PM Sean Heskett
<[email protected] <mailto:[email protected]>> wrote:
We use the PacketFlux rack injector - great product
and easy to use for lots of different equipment types.
We ripped out all of our CMM5s because honestly they
are a PITA and a very clunky solution.
-Sean
On Thu, Feb 27, 2020 at 11:09 AM Shayne Lebrun
<[email protected]
<mailto:[email protected]>> wrote:
What are the various options for providing sync to
a 3.65 450M?
--
AF mailing list
[email protected] <mailto:[email protected]>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
[email protected] <mailto:[email protected]>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
[email protected] <mailto:[email protected]>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
[email protected] <mailto:[email protected]>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
[email protected] <mailto:[email protected]>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
