The provider charges more for a “trunk”. And Lewis, I already have this service set up through them for another system We have some unique LNP porting issues and really want the voip provider to have a direct connection to us.
From: Brian Webster Sent: Wednesday, September 23, 2020 12:35 PM To: 'AnimalFarm Microwave Users Group' Subject: Re: [AFMUG] OT sip question It’s been a while since I have done an asterisk config but you still configure a SIP account much the same as you would for the ATA and it becomes a trunk as I recall and then you do whatever you need to with it as a single line trunk. Way back when I was learning it and playing I had multiple providers for single lines and even an IAX line too. Then I could use them as part of the dial plan and other features as to where it would ring and dial out. Thank you, Brian Webster www.wirelessmapping.com From: AF [mailto:[email protected]] On Behalf Of [email protected] Sent: Wednesday, September 23, 2020 2:01 PM To: [email protected] Subject: [AFMUG] OT sip quiestion If I get a voip service from some random provider and I have a sip device on my end, I am golden. Say an ATA connected to a pots phone. Now, if I want that number to appear inside an asterisk PBX but I don’t want to buy a trunk, is there an easy way to do that? -------------------------------------------------------------------------------- -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
