can you detail that? On Wed, Sep 23, 2020 at 1:21 PM Josh Baird <[email protected]> wrote:
> DS modulation doesn't imply that MU-MIMO is actually being used though. > > MU-MIMO only kicks in when the AP is approaching maximum frame utilization. > > On Wed, Sep 23, 2020 at 2:18 PM Steve Jones <[email protected]> > wrote: > >> ds is mumimo >> >> On Wed, Sep 23, 2020 at 12:10 PM Nate Burke <[email protected]> wrote: >> >>> We replaced an EPMP2k AP with an EPMP3k AP yesterday. Both had BSA >>> attached, Same RF Channel. Mix of EPMP 1000/200/300 SMs >>> >>> EPMP1000/200 SMs did not have any change, either Signal or Modulation. >>> EPMP300 SMs had a signal increase of 3-4db and noticeable increase in >>> modulation on upstream, and a slight increase in downstream. >>> >>> Biggest difference is BW through the AP is up about 25% today, and Frame >>> utilization is 50% less than the EPMP2k AP. Watching the BW chart in >>> the AP, I don't see MU-MIMO being activated at all. >>> >>> -- >>> AF mailing list >>> [email protected] >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
