The 2k AP was regularly going to 100% frame utilization. The 3K AP is running about 50% and spiking to 80%. (via 5 minute reads with MRTG)

On 9/24/2020 9:29 AM, Darin Steffl wrote:
Cambium has been saying for a while that you should see at least a 10% improvement in throughput and lower latency going from 1/2k to 3k gear even with Force 200 and elevate clients.

On Thu, Sep 24, 2020 at 9:27 AM Josh Luthman <[email protected] <mailto:[email protected]>> wrote:

    Based on my swap, that's simply wrong.

    I think we can all agree to expect much more improvement with 300
    SM, though.

    Josh Luthman
    24/7 Help Desk: 937-552-2340
    Direct: 937-552-2343
    1100 Wayne St
    Suite 1337
    Troy, OH 45373


    On Thu, Sep 24, 2020 at 10:22 AM David Sovereen via AF
    <[email protected] <mailto:[email protected]>> wrote:

        Was I misinformed?  I was told that replacing ePMP 2000 APs
        with ePMP 3000 APs would have zero effect on capacity without
        changing out SMs to ePMP 3000 series SMs.  Is that wrong?

        Dave


        On Sep 24, 2020, at 9:51 AM, Josh Luthman
        <[email protected]
        <mailto:[email protected]>> wrote:

        We did a 1000 to 3000L swap on Tuesday morning.  Noticing the
same thing - more capacity and much less frame utilization. I think there were 36 SM - mostly force 200 but some
        elevate/300-25.

        Josh Luthman
        24/7 Help Desk: 937-552-2340
        Direct: 937-552-2343
        1100 Wayne St
        Suite 1337
        Troy, OH 45373


        On Wed, Sep 23, 2020 at 1:10 PM Nate Burke
        <[email protected] <mailto:[email protected]>> wrote:

We replaced an EPMP2k AP with an EPMP3k AP yesterday. Both had BSA
            attached, Same RF Channel.  Mix of EPMP 1000/200/300 SMs

            EPMP1000/200 SMs did not have any change, either Signal
            or Modulation.
            EPMP300 SMs had a signal increase of 3-4db and noticeable
            increase in
            modulation on upstream, and a slight increase in downstream.

            Biggest difference is BW through the AP is up about 25%
            today, and Frame
            utilization is 50% less than the EPMP2k AP. Watching the
            BW chart in
            the AP, I don't see MU-MIMO being activated at all.

-- AF mailing list
            [email protected] <mailto:[email protected]>
            http://af.afmug.com/mailman/listinfo/af_af.afmug.com

-- AF mailing list
        [email protected] <mailto:[email protected]>
        http://af.afmug.com/mailman/listinfo/af_af.afmug.com

-- AF mailing list
        [email protected] <mailto:[email protected]>
        http://af.afmug.com/mailman/listinfo/af_af.afmug.com

-- AF mailing list
    [email protected] <mailto:[email protected]>
    http://af.afmug.com/mailman/listinfo/af_af.afmug.com



--
Darin Steffl
Minnesota WiFi
www.mnwifi.com <http://www.mnwifi.com/>
507-634-WiFi
Like us on Facebook <http://www.facebook.com/minnesotawifi>



-- 
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to