Was I misinformed? I was told that replacing ePMP 2000 APs with ePMP 3000 APs would have zero effect on capacity without changing out SMs to ePMP 3000 series SMs. Is that wrong?
Dave > On Sep 24, 2020, at 9:51 AM, Josh Luthman <[email protected]> wrote: > > We did a 1000 to 3000L swap on Tuesday morning. Noticing the same thing - > more capacity and much less frame utilization. I think there were 36 SM - > mostly force 200 but some elevate/300-25. > > Josh Luthman > 24/7 Help Desk: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > On Wed, Sep 23, 2020 at 1:10 PM Nate Burke <[email protected] > <mailto:[email protected]>> wrote: > We replaced an EPMP2k AP with an EPMP3k AP yesterday. Both had BSA > attached, Same RF Channel. Mix of EPMP 1000/200/300 SMs > > EPMP1000/200 SMs did not have any change, either Signal or Modulation. > EPMP300 SMs had a signal increase of 3-4db and noticeable increase in > modulation on upstream, and a slight increase in downstream. > > Biggest difference is BW through the AP is up about 25% today, and Frame > utilization is 50% less than the EPMP2k AP. Watching the BW chart in > the AP, I don't see MU-MIMO being activated at all. > > -- > AF mailing list > [email protected] <mailto:[email protected]> > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > <http://af.afmug.com/mailman/listinfo/af_af.afmug.com> > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
