Yeah So sidewalk guys is kind of what I was considering but using the base of 
the tower with a turnbuckle instead. 


From: "Ken Hohhof" <[email protected]> 
To: "AnimalFarm Microwave Users Group" <[email protected]> 
Sent: Monday, December 21, 2020 9:47:01 PM 
Subject: Re: [AFMUG] stabilizing an Unguyed tower 



For utility poles, they have what is called a sidewalk guy. Or at grain 
elevators, if they can’t put the guy anchor far enough out, they will sink an 
I-beam and attach the guy to the top of that. 




From: AF <[email protected]> On Behalf Of Steve Jones 
Sent: Monday, December 21, 2020 9:41 PM 
To: AnimalFarm Microwave Users Group <[email protected]> 
Subject: Re: [AFMUG] stabilizing an Unguyed tower 





Do they make tower struts? I would think rigid enough struts would probably be 
massive and so heavy that the down force would exceed the base load, but what 
do I know. Probably would cost less to put up a self supporting tower at that 
point anyway 





On Mon, Dec 21, 2020, 9:20 PM Craig House < [ mailto:[email protected] | 
[email protected] ] > wrote: 




The attached drawing is rough but I hope you get the idea. It is not the tower 
in questions but is a photo I had I could mark up 

I have a customer that has a tower in the very corner of their yard 90 degree 
angle corner. Best I can get in the yard is one guy wire and the neighbor is 
not an option to put guy wires in. 25g 50' tall. I'd like to make it more 
stable but how? The base is in concrete and has been there for some time. Heavy 
winds have not caused damage to the tower so it is not about how solid it is as 
much as how much it moves Would a guy wire design where all three legs were 
guyed back to the base of the tower using some kind of stand off in the middle 
do anything? I think it might make the tower more rigid but would it keep it 
from swaying? Since some of the unstableness of the tower comes from the joints 
it seems like it might help but is it worth the effort? I maybe could move out 
3' from the base but that angle just doesn't do much more than attaching to the 
base just above the concrete. Thoughts?-- 
AF mailing list 
[ mailto:[email protected] | [email protected] ] 
[ http://af.afmug.com/mailman/listinfo/af_af.afmug.com | 
http://af.afmug.com/mailman/listinfo/af_af.afmug.com ] 



-- 
AF mailing list 
[email protected] 
http://af.afmug.com/mailman/listinfo/af_af.afmug.com 
-- 
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to