I assume the budget does not allow replacing it with a true self-supporter? Like a Rohn SSV, or I think Trylon makes some.
From: AF <[email protected]> On Behalf Of Craig House Sent: Tuesday, December 22, 2020 9:37 AM To: AnimalFarm Microwave Users Group <[email protected]> Subject: Re: [AFMUG] stabilizing an Unguyed tower Moving is not an option. No LOS from any other spot without going way taller Sent from my iPhone On Dec 22, 2020, at 08:49, Sam Lambie <[email protected] <mailto:[email protected]> > wrote: Is the owner willing to move the tower in from the property line enough to guy it properly? On Tue, Dec 22, 2020 at 7:36 AM dave <[email protected] <mailto:[email protected]> > wrote: How is it unstable? does it wobble? or is it a sturdy /twisty kinda thing? Most of that can be contained by just adding braces between the legs top middle bottom. more if needed <Vcard.jpg> On 12/21/20 9:46 PM, Adam Moffett wrote: On utility poles they sometimes use "sidewalk guys" in tight places. The wire goes to an arm and then straight down. Lateral force on the pole wants to pull straight up on the anchor so you get an auger in real deep. Could you put an auger in adjacent to the pad? <https://d3i71xaburhd42.cloudfront.net/0a7587556730d8a91c54c9a5e41d64338b9f3c8e/5-Figure1-1.png> On 12/21/2020 10:20 PM, Craig House wrote: The attached drawing is rough but I hope you get the idea. It is not the tower in questions but is a photo I had I could mark up I have a customer that has a tower in the very corner of their yard 90 degree angle corner. Best I can get in the yard is one guy wire and the neighbor is not an option to put guy wires in. 25g 50' tall. I'd like to make it more stable but how? The base is in concrete and has been there for some time. Heavy winds have not caused damage to the tower so it is not about how solid it is as much as how much it moves Would a guy wire design where all three legs were guyed back to the base of the tower using some kind of stand off in the middle do anything? I think it might make the tower more rigid but would it keep it from swaying? Since some of the unstableness of the tower comes from the joints it seems like it might help but is it worth the effort? I maybe could move out 3' from the base but that angle just doesn't do much more than attaching to the base just above the concrete. Thoughts? -- AF mailing list [email protected] <mailto:[email protected]> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- -- Sam Lambie Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com <http://www.newmex.com>
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
