Yeah not really this is an attempt to use what he already has to get him service which is not going to make me money back if I have to put a lot into it
Sent from my iPhone > On Dec 22, 2020, at 09:49, Ken Hohhof <[email protected]> wrote: > > > I assume the budget does not allow replacing it with a true self-supporter? > Like a Rohn SSV, or I think Trylon makes some. > > From: AF <[email protected]> On Behalf Of Craig House > Sent: Tuesday, December 22, 2020 9:37 AM > To: AnimalFarm Microwave Users Group <[email protected]> > Subject: Re: [AFMUG] stabilizing an Unguyed tower > > Moving is not an option. No LOS from any other spot without going way taller > > Sent from my iPhone > > > On Dec 22, 2020, at 08:49, Sam Lambie <[email protected]> wrote: > > > Is the owner willing to move the tower in from the property line enough to > guy it properly? > > On Tue, Dec 22, 2020 at 7:36 AM dave <[email protected]> wrote: > How is it unstable? > does it wobble? > or is it a sturdy /twisty kinda thing? > > Most of that can be contained by just adding braces between the legs top > middle bottom. > more if needed > > > <Vcard.jpg> > On 12/21/20 9:46 PM, Adam Moffett wrote: > On utility poles they sometimes use "sidewalk guys" in tight places. The > wire goes to an arm and then straight down. Lateral force on the pole wants > to pull straight up on the anchor so you get an auger in real deep. Could > you put an auger in adjacent to the pad? > > > > > > > > On 12/21/2020 10:20 PM, Craig House wrote: > The attached drawing is rough but I hope you get the idea. It is not the > tower in questions but is a photo I had I could mark up > > I have a customer that has a tower in the very corner of their yard 90 > degree angle corner. Best I can get in the yard is one guy wire and the > neighbor is not an option to put guy wires in. 25g 50' tall. I'd like to > make it more stable but how? The base is in concrete and has been there for > some time. Heavy winds have not caused damage to the tower so it is not > about how solid it is as much as how much it moves Would a guy wire design > where all three legs were guyed back to the base of the tower using some kind > of stand off in the middle do anything? I think it might make the tower more > rigid but would it keep it from swaying? Since some of the unstableness of > the tower comes from the joints it seems like it might help but is it worth > the effort? I maybe could move out 3' from the base but that angle just > doesn't do much more than attaching to the base just above the concrete. > Thoughts? > > > > > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > -- > -- > Sam Lambie > Taosnet Wireless Tech. > 575-758-7598 Office > www.Taosnet.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
