Google direct buries most of their splice enclosures with a locate ball. I am thinking of making a large cube of styrofoam that has a pocket for the splice case. Direct bury it all with a locate ball. Need back in, just cut the sod and pull out the styrofoam.
The strength of a block of styrofoam is in the same range of firm to stiff soil. Lot less money than a handhole. You could use a hot blade and cut it up to get it out if you needed the slack coil. From: Jason McKemie Sent: Wednesday, June 16, 2021 12:07 PM To: AnimalFarm Microwave Users Group Subject: [AFMUG] Handhole / vault recommendation I've been using the Carson / Oldcastle 2200-18 vaults with a 6" extension, but everything is backordered 30+ weeks. Does anyone have any alternate suggestions for a vault to hold a FOSC 450A splice closure? HDPE would probably be preferable, but I could do a concrete polymer if necessary. Thanks. -------------------------------------------------------------------------------- -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
