I would think carve it with a wire cutter. Polyurethane is pretty expensive foam.
From: Adam Moffett Sent: Thursday, June 17, 2021 4:04 AM To: [email protected] Subject: Re: [AFMUG] Handhole / vault recommendation So do you carve a handhole pocket out of a solid block, or mold the styrofoam with a handhole pocket built in? I wonder if you could mold your own out of polyurethane foam. https://www.fibreglast.com/product/2lb-Mix-And-Pour-Foam?gclid=Cj0KCQjw5auGBhDEARIsAFyNm9HWb1-WKMvpV4NJobUzWOFaDRUJVW8DnQHnezAOVTeMb29vpJGHUdsaAizlEALw_wcB On 6/16/2021 6:11 PM, Chuck McCown via AF wrote: Google direct buries most of their splice enclosures with a locate ball. I am thinking of making a large cube of styrofoam that has a pocket for the splice case. Direct bury it all with a locate ball. Need back in, just cut the sod and pull out the styrofoam. The strength of a block of styrofoam is in the same range of firm to stiff soil. Lot less money than a handhole. You could use a hot blade and cut it up to get it out if you needed the slack coil. From: Jason McKemie Sent: Wednesday, June 16, 2021 12:07 PM To: AnimalFarm Microwave Users Group Subject: [AFMUG] Handhole / vault recommendation I've been using the Carson / Oldcastle 2200-18 vaults with a 6" extension, but everything is backordered 30+ weeks. Does anyone have any alternate suggestions for a vault to hold a FOSC 450A splice closure? HDPE would probably be preferable, but I could do a concrete polymer if necessary. Thanks. ------------------------------------------------------------------------------ -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com -------------------------------------------------------------------------------- -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
