So do you carve a handhole pocket out of a solid block, or mold the
styrofoam with a handhole pocket built in?
I wonder if you could mold your own out of polyurethane foam.
https://www.fibreglast.com/product/2lb-Mix-And-Pour-Foam?gclid=Cj0KCQjw5auGBhDEARIsAFyNm9HWb1-WKMvpV4NJobUzWOFaDRUJVW8DnQHnezAOVTeMb29vpJGHUdsaAizlEALw_wcB
On 6/16/2021 6:11 PM, Chuck McCown via AF wrote:
Google direct buries most of their splice enclosures with a locate ball.
I am thinking of making a large cube of styrofoam that has a pocket
for the splice case.
Direct bury it all with a locate ball. Need back in, just cut the sod
and pull out the styrofoam.
The strength of a block of styrofoam is in the same range of firm to
stiff soil.
Lot less money than a handhole. You could use a hot blade and cut it
up to get it out if you needed the slack coil.
*From:* Jason McKemie
*Sent:* Wednesday, June 16, 2021 12:07 PM
*To:* AnimalFarm Microwave Users Group
*Subject:* [AFMUG] Handhole / vault recommendation
I've been using the Carson / Oldcastle 2200-18 vaults with a 6"
extension, but everything is backordered 30+ weeks. Does anyone have
any alternate suggestions for a vault to hold a FOSC 450A splice
closure? HDPE would probably be preferable, but I could do a concrete
polymer if necessary.
Thanks.
------------------------------------------------------------------------
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
