Would that be true even on these that bolt onto a concrete base? I
would think that a 80' pole would be 80' if it's bolting on a base.
Install of $3-4k, what was the actual pole cost?
On 1/5/2022 7:43 AM, [email protected] wrote:
And btw: an 80' pole is 70' AGL. The bottom 10ft goes in the dirt.
-----Original Message-----
From: Adam Moffett <[email protected]>
Sent: Wednesday, January 05, 2022 8:27 AM
To: [email protected]
Subject: Re: [AFMUG] Musco Towers
My last outfit did a whole bunch of 80' fiberglass poles like that. With step
bolts, safety climb systems, and mounting hardware at the top.
80' was about the biggest pole you could put in with a normal size digger
derrick truck. You can call any utility line contractor for that. We had them
put in for around $2500 each. Bore hole, assemble pole sections, drop in hole,
back fill, and hydraulic compaction. I'm positive we can't get that price
today, but I'd imagine $3000-$4000 for installation. Obviously it's different
if it's your own derrick truck.
We did one that was 96' and called in a crane for that one. The derrick truck
could lift it, but wasn't tall enough to pick it above the center of gravity so
couldn't tip it into the hole. Even so, crane service for a few hours was only
an extra $500 or so.
-Adam
On 12/23/2021 12:14 PM, Nate Burke wrote:
https://www.musco.com/wireless-structures/
Anybody used these or know about pricing? We seem to have a growing
need for 60-100' towers, but the concrete cost is always the killer.
Seems like this would need a smaller concrete base, and doesn't need
all the forming and curing time. Years ago we did a project for a
municipality, and they put in a 50' light pole for us to attach a
single SM to, but they just backfilled the precast base with aggregate
and did start to finish in a couple hours. It was just a normal
streetlight pole though, no pegs or anything.
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
