We did a Musco at 120ft last year with a wind load design of 4 450m 3GHz
and 2 2ft dishes. The pole was about $25k. Installation was estimated at
about 15k from Musco on their "typical install costs". Ours ended up
costing about $22k to install. Being our first Musco, we went with one
of Musco's recommended installers. Their pricing was much higher right
from the start and ended up using extra concrete and they had to leave
the steel casing on the ground due to soil/water level conditions. Other
than the extra cost, we love it. Quick deployment. We installed all the
wireless gear and cabling while the pole was on the ground. Drill the
hole, set the prefab base and poor the concrete one day and stand the
pole up the next. One climb to align the backhauls and it's done.
Leroy
On 1/5/2022 9:45 AM, Nate Burke wrote:
I have no details, but in the promotional video they have it looks
like 4 450Ms and 2 2or3' dishes at the top of what looks like a 100'
pole.
On 1/5/2022 8:38 AM, Tim Withrow via AF wrote:
Whats the windloading on these towers?
On Wed, Jan 5, 2022 at 9:35 AM, Nate Burke
<[email protected]> wrote:
Would that be true even on these that bolt onto a concrete base? I
would think that a 80' pole would be 80' if it's bolting on a base.
Install of $3-4k, what was the actual pole cost?
On 1/5/2022 7:43 AM, [email protected] wrote:
> And btw: an 80' pole is 70' AGL. The bottom 10ft goes in the
dirt.
>
>
> -----Original Message-----
> From: Adam Moffett <[email protected]>
> Sent: Wednesday, January 05, 2022 8:27 AM
> To: [email protected]
> Subject: Re: [AFMUG] Musco Towers
>
> My last outfit did a whole bunch of 80' fiberglass poles like
that. With step bolts, safety climb systems, and mounting
hardware at the top.
>
> 80' was about the biggest pole you could put in with a normal
size digger derrick truck. You can call any utility line
contractor for that. We had them put in for around $2500 each.
Bore hole, assemble pole sections, drop in hole, back fill, and
hydraulic compaction. I'm positive we can't get that price
today, but I'd imagine $3000-$4000 for installation. Obviously
it's different if it's your own derrick truck.
>
> We did one that was 96' and called in a crane for that one.
The derrick truck could lift it, but wasn't tall enough to pick
it above the center of gravity so couldn't tip it into the hole.
Even so, crane service for a few hours was only an extra $500 or so.
>
> -Adam
>
>
> On 12/23/2021 12:14 PM, Nate Burke wrote:
>> https://www.musco.com/wireless-structures/
>>
>> Anybody used these or know about pricing? We seem to have a
growing
>> need for 60-100' towers, but the concrete cost is always the
killer.
>> Seems like this would need a smaller concrete base, and
doesn't need
>> all the forming and curing time. Years ago we did a project for a
>> municipality, and they put in a 50' light pole for us to attach a
>> single SM to, but they just backfilled the precast base with
aggregate
>> and did start to finish in a couple hours. It was just a normal
>> streetlight pole though, no pegs or anything.
>>
>
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
