Bill, Got it. Gave up on trying to do an update directly on the unit. Just set th AP to auto-update and it took care of it for me.
-- Best regards, Mark mailto:[email protected] Myakka Communications www.Myakka.com ------ Monday, October 17, 2022, 2:14:50 PM, you wrote: BP> IIRC, CNUT not only uses the SNMP community string, but it also needs to login to the SM. Make sure you have the username/password set for CLI access. BP> bp BP> <part15sbs{at}gmail{dot}com> BP> On 10/17/2022 11:09 AM, Mark - Myakka Technologies wrote: >> I still have a couple of customers on Canopy FSK900. Had to replace a radio >> due to storm damage. Radio is at FW 7.2.9. I'm trying to upgrade to 10.5. >> Dusted off all my CNUT stuff. Have everything loaded and discovered, but >> keep getting "No SNMP response" from SM. I can log into SM and see the SNMP >> community and it matches the CNUT settings. Tried v1 and v2c with no luck. >> Any ideas? >> > >> >> -- >> >> Thanks, >> Mark mailto:[email protected] >> >> Myakka Communications >> www.Myakka.com >> >> -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
