I figured out the first poke but not the second. From: Colin Stanners Sent: Monday, October 17, 2022 11:14 PM To: AnimalFarm Microwave Users Group Cc: Chuck McCown Subject: Re: [AFMUG] Old Canopy FW upgrade
*FSK SM into an FSK AP. It wasn't hard to get, I wasn't a programmer and I had discovered it after a few days of SM and AP memory dumping through scripts and telnet PEEKs, looking at diffs and fiddling around with POKE commands. Then I mentioned it to Mr. H from down under and he had a more reliable POKE address that survived config changes better IIRC. That was like 10 years ago, afterwards I didn't really keep note of the final commands / "cheat code" as you call it but it was an educational challenge. On Mon., Oct. 17, 2022, 4:02 p.m. Chuck McCown via AF, <[email protected]> wrote: Sure be nice if some other Chuck gave you the cheat code to turn an SM into an AP... From: CBB - Jay Fuller Sent: Monday, October 17, 2022 2:29 PM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] Old Canopy FW upgrade I was ready to chime in. Glad you got it. ----- Reply message ----- From: "Mark - Myakka Technologies" <[email protected]> To: "AnimalFarm Microwave Users Group" <[email protected]> Subject: [AFMUG] Old Canopy FW upgrade Date: Mon, Oct 17, 2022 2:27 PM Bill, Got it. Gave up on trying to do an update directly on the unit. Just set th AP to auto-update and it took care of it for me. -- Best regards, Mark mailto:[email protected] Myakka Communications www.Myakka.com ------ Monday, October 17, 2022, 2:14:50 PM, you wrote: BP> IIRC, CNUT not only uses the SNMP community string, but it also needs to login to the SM. Make sure you have the username/password set for CLI access. BP> bp BP> <part15sbs{at}gmail{dot}com> BP> On 10/17/2022 11:09 AM, Mark - Myakka Technologies wrote: >> I still have a couple of customers on Canopy FSK900. Had to replace a radio >> due to storm damage. Radio is at FW 7.2.9. I'm trying to upgrade to 10.5. >> Dusted off all my CNUT stuff. Have everything loaded and discovered, but >> keep getting "No SNMP response" from SM. I can log into SM and see the SNMP >> community and it matches the CNUT settings. Tried v1 and v2c with no luck. >> Any ideas? >> > >> >> -- >> >> Thanks, >> Mark mailto:[email protected] >> >> Myakka Communications >> www.Myakka.com >> >> -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com ------------------------------------------------------------------------------ -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
