No, we have fuse alarms, rectifier, inverter, and other comm equipment alarm
contacts. Circuit breaker alarms. That is why historically I liked the
netguardian product. It eats everything. Monitors DC voltages etc. Temps
From: Bill Prince
Sent: Wednesday, May 8, 2024 1:13 PM
To: af@af.afmug.com
Subject: Re: [AFMUG] SNMP
I think if your installed equipment all came from one vendor, there might be
some way to do their proprietary monitoring solution.
However, SNMP as flawed as it might be, is the only standard that is nearly
universal (because some implementations are better than others).
bp
<part15sbs{at}gmail{dot}com>On 5/8/2024 11:30 AM, Chuck McCown via AF wrote:
We are needing to add some monitoring of old fashioned alarm contacts in one
of our sites. In the past I used Netguardians. Not sure what Forrest has.
Is SNMP still the defacto NMS comm method or are there better more modern
stuff out there we should be looking at?
Best Regards,
Chuck McCown
McCown Technology Corporation
8401 N Commerce Dr
Lake Point, Utah 84074
801-250-9503 Office
435-830-4306 Cell
www.mccowntech.com
www.microtrench.pro
www.terabitnetworks.com
--------------------------------------------------------------------------------
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
