So how do Forrest’s products let you know of an issue? Traps? \Would love to NOT have to have NMS just for this.
From: TJ Trout Sent: Wednesday, May 8, 2024 1:35 PM To: AnimalFarm Microwave Users Group Cc: Chuck McCown Subject: Re: [AFMUG] SNMP Packet flux can do it all too, the base unit can monitor two voltages and temp and a few contact closures, if you need more volt inputs or closures you add a expansion unit. No email that I'm aware of On Wed, May 8, 2024, 12:23 PM Chuck McCown via AF <[email protected]> wrote: No, we have fuse alarms, rectifier, inverter, and other comm equipment alarm contacts. Circuit breaker alarms. That is why historically I liked the netguardian product. It eats everything. Monitors DC voltages etc. Temps From: Bill Prince Sent: Wednesday, May 8, 2024 1:13 PM To: [email protected] Subject: Re: [AFMUG] SNMP I think if your installed equipment all came from one vendor, there might be some way to do their proprietary monitoring solution. However, SNMP as flawed as it might be, is the only standard that is nearly universal (because some implementations are better than others). bp <part15sbs{at}gmail{dot}com>On 5/8/2024 11:30 AM, Chuck McCown via AF wrote: We are needing to add some monitoring of old fashioned alarm contacts in one of our sites. In the past I used Netguardians. Not sure what Forrest has. Is SNMP still the defacto NMS comm method or are there better more modern stuff out there we should be looking at? Best Regards, Chuck McCown McCown Technology Corporation 8401 N Commerce Dr Lake Point, Utah 84074 801-250-9503 Office 435-830-4306 Cell www.mccowntech.com www.microtrench.pro www.terabitnetworks.com ------------------------------------------------------------------------------ -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
