IMC is all we use.  Have saved a ton of cash since we discovered IMC.

On Tue, Oct 7, 2014 at 7:59 PM, Ken Hohhof via Af <[email protected]> wrote:

>   IMC conduit weighs about half as much as rigid pipe and is equally
> strong or stronger due to the work hardening.  Any electrical supply house
> will have it.  But it is harder than rigid pipe so mounting clamps may not
> dig in very well.
>
>
>  *From:* Mike Hammett via Af <[email protected]>
> *Sent:* Tuesday, October 07, 2014 8:50 PM
> *To:* [email protected]
> *Subject:* Re: [AFMUG] Support bracket for RocketDish 34db 3 foot dish
>
>  I get tower pipe from Primus because it's local...  otherwise the
> biggest pipe Menards has that fits in the mount.  ;-)
>
> I have a bunch of 2-7/8" sections waiting for a home because they wouldn't
> fit in the Force 100's mounts.
>
>
>
> -----
> Mike Hammett
> Intelligent Computing Solutions
> http://www.ics-il.com
>
> ------------------------------
> *From: *"Darin Steffl via Af" <[email protected]>
> *To: *[email protected]
> *Sent: *Tuesday, October 7, 2014 5:10:57 PM
> *Subject: *Re: [AFMUG] Support bracket for RocketDish 34db 3 foot dish
>
> Where do you buy your pipe at? Right now we're just getting at Menards but
> their heavy duty stuff is really expensive. We buy the thin-wall emt but
> for these we would like stronger pipe but seeing if there's a cheaper place
> than the big box stores like Home Depot and Menards.
>
> On Tue, Oct 7, 2014 at 5:06 PM, Josh Reynolds via Af <[email protected]> wrote:
>
>>  edit: 2" pipe is fine as long as it isn't like, thinwall-emt or
>> something
>>
>> Josh Reynolds, Chief Information Officer
>> SPITwSPOTS, www.spitwspots.com
>>  On 10/07/2014 02:04 PM, Josh Reynolds via Af wrote:
>>
>> 2" pipe is fine unless you expect 150MPH winds, which the gear itself
>> isn't rated for anyway.
>>
>> Josh Reynolds, Chief Information Officer
>> SPITwSPOTS, www.spitwspots.com
>> On 10/07/2014 02:00 PM, Darin Steffl via Af wrote:
>>
>> Hey guys,
>>
>> Is there a way or do you recommend adding a support brace to the
>> RocketDish 34db 3 foot dish at all? We haven't used them before but we got
>> some for a 20-mile link and we're adding RF Armor as well so they're quite
>> heavy. What are your recommendations for a mount for these and any
>> additional bracing to make sure they don't blow back and forth. Is a 2"
>> pipe enough for the bracket on these?   Thanks
>>
>> --
>> Darin Steffl
>> Minnesota WiFi
>> www.mnwifi.com
>> 507-634-WiFi
>>  <http://www.facebook.com/minnesotawifi> Like us on Facebook
>> <http://www.facebook.com/minnesotawifi>
>>
>>
>>
>>
>
>
> --
> Darin Steffl
> Minnesota WiFi
> www.mnwifi.com
> 507-634-WiFi
>  <http://www.facebook.com/minnesotawifi> Like us on Facebook
> <http://www.facebook.com/minnesotawifi>
>
>

Reply via email to