What are you guys paying for 2inch imc conduit? Found some for $29 for 10 foot while rigid is $42 for the same.
On Tuesday, October 7, 2014, Jeremy via Af <[email protected]> wrote: > IMC is all we use. Have saved a ton of cash since we discovered IMC. > > On Tue, Oct 7, 2014 at 7:59 PM, Ken Hohhof via Af <[email protected] > <javascript:_e(%7B%7D,'cvml','[email protected]');>> wrote: > >> IMC conduit weighs about half as much as rigid pipe and is equally >> strong or stronger due to the work hardening. Any electrical supply house >> will have it. But it is harder than rigid pipe so mounting clamps may not >> dig in very well. >> >> >> *From:* Mike Hammett via Af >> <javascript:_e(%7B%7D,'cvml','[email protected]');> >> *Sent:* Tuesday, October 07, 2014 8:50 PM >> *To:* [email protected] <javascript:_e(%7B%7D,'cvml','[email protected]');> >> *Subject:* Re: [AFMUG] Support bracket for RocketDish 34db 3 foot dish >> >> I get tower pipe from Primus because it's local... otherwise the >> biggest pipe Menards has that fits in the mount. ;-) >> >> I have a bunch of 2-7/8" sections waiting for a home because they >> wouldn't fit in the Force 100's mounts. >> >> >> >> ----- >> Mike Hammett >> Intelligent Computing Solutions >> http://www.ics-il.com >> >> ------------------------------ >> *From: *"Darin Steffl via Af" <[email protected] >> <javascript:_e(%7B%7D,'cvml','[email protected]');>> >> *To: *[email protected] <javascript:_e(%7B%7D,'cvml','[email protected]');> >> *Sent: *Tuesday, October 7, 2014 5:10:57 PM >> *Subject: *Re: [AFMUG] Support bracket for RocketDish 34db 3 foot dish >> >> Where do you buy your pipe at? Right now we're just getting at Menards >> but their heavy duty stuff is really expensive. We buy the thin-wall emt >> but for these we would like stronger pipe but seeing if there's a cheaper >> place than the big box stores like Home Depot and Menards. >> >> On Tue, Oct 7, 2014 at 5:06 PM, Josh Reynolds via Af <[email protected] >> <javascript:_e(%7B%7D,'cvml','[email protected]');>> wrote: >> >>> edit: 2" pipe is fine as long as it isn't like, thinwall-emt or >>> something >>> >>> Josh Reynolds, Chief Information Officer >>> SPITwSPOTS, www.spitwspots.com >>> On 10/07/2014 02:04 PM, Josh Reynolds via Af wrote: >>> >>> 2" pipe is fine unless you expect 150MPH winds, which the gear itself >>> isn't rated for anyway. >>> >>> Josh Reynolds, Chief Information Officer >>> SPITwSPOTS, www.spitwspots.com >>> On 10/07/2014 02:00 PM, Darin Steffl via Af wrote: >>> >>> Hey guys, >>> >>> Is there a way or do you recommend adding a support brace to the >>> RocketDish 34db 3 foot dish at all? We haven't used them before but we got >>> some for a 20-mile link and we're adding RF Armor as well so they're quite >>> heavy. What are your recommendations for a mount for these and any >>> additional bracing to make sure they don't blow back and forth. Is a 2" >>> pipe enough for the bracket on these? Thanks >>> >>> -- >>> Darin Steffl >>> Minnesota WiFi >>> www.mnwifi.com >>> 507-634-WiFi >>> <http://www.facebook.com/minnesotawifi> Like us on Facebook >>> <http://www.facebook.com/minnesotawifi> >>> >>> >>> >>> >> >> >> -- >> Darin Steffl >> Minnesota WiFi >> www.mnwifi.com >> 507-634-WiFi >> <http://www.facebook.com/minnesotawifi> Like us on Facebook >> <http://www.facebook.com/minnesotawifi> >> >> > > -- Darin Steffl Minnesota WiFi www.mnwifi.com 507-634-WiFi <http://www.facebook.com/minnesotawifi> Like us on Facebook <http://www.facebook.com/minnesotawifi>
