External gain setting? I've also noticed that if the carrier frequency
is set to None, it will let you put in the max Tx power for the
hardware. Set a real frequency and you're limited to whatever regulatory
EIRP it was authorized for. For instance, if it's a connectorized unit,
Cambium probably had it certified with a 2' dish at 28-29dBi, so it
would not surprise me if all you get is +19 to meet spectral masks and
OOB crap. Like the 2.4 450SM on a reflector cannot operate above 2460 on
a 20MHz channel because of whatever impedance thing happens with that.
On 10/10/2014 7:01 PM, Bill Prince via Af wrote:
The master is locked to North America/United States.
But when first powered the unit on, it __*was*__ set to 22 dBm. After
I configured it, it went to 16/16 (19 combined), and won't let me
change it.
bp
On 10/10/2014 10:37 AM, Peter Kranz via Af wrote:
You've got something regulatory going on.. the radios can transmit up
to 22dbm combined H+V.. or perhaps your seeing the single chain power
level of 19 dBm..
Peter Kranz
Founder/CEO - Unwired Ltd
www.UnwiredLtd.com
Desk: 510-868-1614 x100
Mobile: 510-207-0000
[email protected]
