We did 3 locations. Top of tower, bottom of tower, and inside the
building just before the surge protector. I have seen others install
these every 50'.
Keefe
On 10/11/2014 3:39 PM, Tyler Treat via Af wrote:
Did you pull off a ground in multiple places on the cable run, or just at the
bottom?
-----Original Message-----
From: Af [mailto:[email protected]] On Behalf Of Keefe John via Af
Sent: Saturday, October 11, 2014 3:24 PM
To: [email protected]
Subject: Re: [AFMUG] BBDGE Grounding Question
Yes we are using shielded ends. They are really tricky to get on. We also use
those exact grounding kits.
Keefe
On 10/11/2014 3:22 PM, Tyler Treat via Af wrote:
For all you guys that rock BBDGE at tower sites -
Are you using shielded ends - Does the copper cladding fit up into the
connector? Care to attach a picture of what you consider a proper connection??
The only time I've messed with this cable, it was a huge PITA to get the
copper cladding up into the shielded connector. Not sure if that was even the
proper method.....?
Do you also bond the shield to ground the same way you would LMR cable
with the ground kit? Similar to this:
https://www.tessco.com/products/displayProductInfo.do?sku=445755&WT.mc
_id=google_base&sp=true
Thanks
Tyler
