There is a knockout for both cable holes that allows for 2 cables
through each hole. I should have taken a picture.
bp
On 10/21/2014 4:19 PM, Matt via Af wrote:
We put up our first PTP450 link last week; an 8.9 mile shot using 28 dBi
panels from MTI. I "eyeballed" the link master, then tuned in the link
slave a couple days later. Signal is coming in at -57 to -58, and typically
running at 8x/8X (have tx power set to 17 dBm at both ends). Went back
today to fine tune the link master, but only got another 1/2 dBm out of it;
I could have stayed home.
How does that work with two RF pigtails and one cat5 coming out bottom
of Canopy case? Then add another cable for timing since there is no
sync over power option.
