I bought like 20 feet of it from ComStar Supply, probably well over a
year ago. They don't even show it on their site anymore. But I just
found this:
http://www.heatshrinksupply.com/pages/product_detailsx.php?part=CFTV-0750 and
that's about 1/2 the price I paid at ComStar! And I have about 5 feet
left, so it's probably time to order again.
On 11/7/2014 11:59 AM, Craig Schmaderer via Af wrote:
DSG Canusa CFTV-750 does anyone have a good place to buy this, hard
time finding anyone to sell my just a little bit.
Or any other heat shrink for n connectors that anyone recommends, this
was one that George uses.
*From:* "George Skorup (Cyber Broadcasting)" <[email protected]
<mailto:[email protected]>>
*Date:* August 6, 2014 at 3:03:17 PM CDT
*To:* <[email protected] <mailto:[email protected]>>
*Subject:* *Re: [AFMUG] PMP450 N connector sealing*
*Reply-To:* <[email protected] <mailto:[email protected]>>
DSG Canusa CFTV-750 is what I use. 3:1 shrink, adhesive lined. Shrinks
down to the Cambium LMR-240 jumpers just fine. It takes a bit of force
to get the 3/4" tube over the slightly larger than 3/4" N male head,
but it works. I use a Wagner heat gun on low. Things get a little
warm, but nothing bad has happened in 30 or so APs.
/Craig R. Schmaderer/
/CEO | Skywave Wireless, Inc./
/Ph: 402-372-1975 | Fax: 402-372-1058/
/Direct: 402-372-1052/
