In a pinch.  Home Depot

Jaime Solorza
On Nov 7, 2014 1:19 PM, "George Skorup (Cyber Broadcasting) via Af" <
[email protected]> wrote:

>  D'oh, just noticed it's Canusa "equivalent" so I'll have to order some
> to see how.. equivalent. But if you endorse it Chuck, it's probably good!
>
> On 11/7/2014 12:46 PM, Chuck Hogg via Af wrote:
>
> I buy from them for Heatshrink...they are pretty good.
> Parts purchased:
>
>  GSHS-3635W-3/8-0
> CATV-1300
> M23053/15-101-0
> M23053/4-302-0
>
>  Regards,
> Chuck
>
> On Fri, Nov 7, 2014 at 1:15 PM, George Skorup (Cyber Broadcasting) via Af
> <[email protected]> wrote:
>
>>  I bought like 20 feet of it from ComStar Supply, probably well over a
>> year ago. They don't even show it on their site anymore. But I just found
>> this:
>> http://www.heatshrinksupply.com/pages/product_detailsx.php?part=CFTV-0750
>> and that's about 1/2 the price I paid at ComStar! And I have about 5 feet
>> left, so it's probably time to order again.
>>
>> On 11/7/2014 11:59 AM, Craig Schmaderer via Af wrote:
>>
>>  DSG Canusa CFTV-750� does anyone have a good place to buy this, hard
>> time finding anyone to sell my just a little bit.�
>>
>> �
>>
>> Or any other heat shrink for n connectors that anyone recommends, this
>> was one that George uses.
>>
>> �
>>
>> *From:* "George Skorup (Cyber Broadcasting)" <[email protected]>
>> *Date:* August 6, 2014 at 3:03:17 PM CDT
>> *To:* <[email protected]>
>> *Subject:* *Re: [AFMUG] PMP450 N connector sealing*
>> *Reply-To:* <[email protected]>
>>
>> DSG Canusa CFTV-750 is what I use. 3:1 shrink, adhesive lined. Shrinks
>> down to the Cambium LMR-240 jumpers just fine. It takes a bit of force to
>> get the 3/4" tube over the slightly larger than 3/4" N male head, but it
>> works. I use a Wagner heat gun on low. Things get a little warm, but
>> nothing bad has happened in 30 or so APs.
>>
>> �
>>
>> *Craig R. Schmaderer*
>>
>> *CEO | Skywave Wireless, Inc.*
>>
>> *Ph: 402-372-1975 <402-372-1975> | Fax: 402-372-1058 <402-372-1058>*
>>
>> *Direct: 402-372-1052 <402-372-1052>*
>>
>> �
>>
>>
>>
>
>

Reply via email to