I buy from them for Heatshrink...they are pretty good. Parts purchased: GSHS-3635W-3/8-0 CATV-1300 M23053/15-101-0 M23053/4-302-0
Regards, Chuck On Fri, Nov 7, 2014 at 1:15 PM, George Skorup (Cyber Broadcasting) via Af < [email protected]> wrote: > I bought like 20 feet of it from ComStar Supply, probably well over a > year ago. They don't even show it on their site anymore. But I just found > this: > http://www.heatshrinksupply.com/pages/product_detailsx.php?part=CFTV-0750 > and that's about 1/2 the price I paid at ComStar! And I have about 5 feet > left, so it's probably time to order again. > > On 11/7/2014 11:59 AM, Craig Schmaderer via Af wrote: > > DSG Canusa CFTV-750� does anyone have a good place to buy this, hard > time finding anyone to sell my just a little bit.� > > � > > Or any other heat shrink for n connectors that anyone recommends, this was > one that George uses. > > � > > *From:* "George Skorup (Cyber Broadcasting)" <[email protected]> > *Date:* August 6, 2014 at 3:03:17 PM CDT > *To:* <[email protected]> > *Subject:* *Re: [AFMUG] PMP450 N connector sealing* > *Reply-To:* <[email protected]> > > DSG Canusa CFTV-750 is what I use. 3:1 shrink, adhesive lined. Shrinks > down to the Cambium LMR-240 jumpers just fine. It takes a bit of force to > get the 3/4" tube over the slightly larger than 3/4" N male head, but it > works. I use a Wagner heat gun on low. Things get a little warm, but > nothing bad has happened in 30 or so APs. > > � > > *Craig R. Schmaderer* > > *CEO | Skywave Wireless, Inc.* > > *Ph: 402-372-1975 <402-372-1975> | Fax: 402-372-1058 <402-372-1058>* > > *Direct: 402-372-1052 <402-372-1052>* > > � > > >
