Please see my previous note on two specific 5.7 SM scan frequencies that were fixed on the SM. That could cause those two to come back unchecked, but they were never possible to use as they were always wrong. We'll look at that as to having the values fixed and keep them checked if they previously were, but the change should not have caused any sm outage.
I think that was the only 5.x frequency issue and was reported at the same time as the 2.4 issue. They are not related. Regards, Aaron -------- Original message -------- From: timothy steele via Af Date:11/14/2014 6:29 AM (GMT-06:00) To: [email protected] Cc: [email protected] Subject: Re: [AFMUG] 13.2 Issue (Removing frequency checkboxes) Ok so sounds like that was just a fluke but why do the 5ghz 450 SM have a bunch of frequencys unchecked after upgrading to 13.2 final? I did not notice that in beta — Sent from Mailbox<https://www.dropbox.com/mailbox> On Fri, Nov 14, 2014 at 6:18 AM, Kurt Fankhauser via Af <[email protected]<mailto:[email protected]>> wrote: I updated some 2.4Ghz 450 stuff overnight (previously on build 22) and did not loose any of the 2.5mhz channelson SM's Kurt Fankhauser Wavelinc Communications P.O. Box 126 Bucyrus, OH 44820 http://www.wavelinc.com<http://www.wavelinc.com/> tel. 419-562-6405 fax. 419-617-0110 On Fri, Nov 14, 2014 at 2:54 AM, Rajesh Vijayakumar via Af <[email protected]<mailto:[email protected]>> wrote: George, Glad to see it upgraded successfully. And thanks for bravely trying it. Ryan, We are continuing our investigation. I will post an update to the list tomorrow morning. Please contact me ([email protected]<mailto:[email protected]>) or Cambium support off list. We will get to the root of this as soon as possible. Rajesh Vijayakumar Cambium Networks On Fri, Nov 14, 2014 at 1:14 AM, George Skorup (Cyber Broadcasting) via Af <[email protected]<mailto:[email protected]>> wrote: I just got done with that sector and everything went fine. Checked all of the SM scan lists before (all running 13.1.3) and after they updated to 13.2. They all look like this still: <2.4_scan.png> On 11/14/2014 12:30 AM, George Skorup (Cyber Broadcasting) via Af wrote: I know I said I was done for the night, but I'm going to update a 2.4 450 sector here shortly. It's on 2460/20MHz, so hopefully nothing bad happens. On 11/14/2014 12:25 AM, Rajesh Vijayakumar via Af wrote: We looked at all the recent changes than went in to 13.2 but did not find anything that would explain this behavior. Also tried to recreate it in the lab on a 2.4 GHz setup, but the SM kept all the checked frequencies after upgrade from 13.1.3 to 13.2. Has anyone else upgraded a 2.4 GHz sector and run into this issue (or did not run into this issue)? Rajesh Vijayakumar Cambium Networks On Thu, Nov 13, 2014 at 10:45 PM, Aaron Schneider via Af <[email protected]<mailto:[email protected]>> wrote: We are investigating the other issues, but with respect to 5767.5 and 5807.5, those two were affected by a bug fix, in that pre-13.2, 5767.5 was actually enabling 5767.20, due to an obvious typo in the scan list code, and 5807.5 was actually enabling 5807.00, due to another typo bug in the code. So correcting these two items may have left them unchecked on an upgrade to 13.2, but they weren’t valid scan frequencies anyways. These two updates didn’t make the release notes due to an oversight. These two frequency updates are in no way related to what is being reported for the 2.5MHz center channels coming back unchecked for 2.4. we are investigating. -Aaron From: Af [mailto:[email protected]<mailto:[email protected]>] On Behalf Of George Skorup (Cyber Broadcasting) via Af Sent: Thursday, November 13, 2014 9:25 PM To: [email protected]<mailto:[email protected]> Subject: Re: [AFMUG] 13.2 Issue (Removing frequency checkboxes) 13.2 on the SM definitely does not jive with build 32 on the AP. So.. don't do that. I forgot I still had that AP on build 32 until it was too late. SMs would pop in session for about 2 seconds and go down again. Luckily updating the AP to 13.2 official fixed it. I'm also seeing 5GHz SMs losing freqs. But it's funny, like 99% of them only lose 5767.5 and 5807.5. I try to avoid the 2.5 centers whenever I can since I've noticed exactly what you guys are seeing here in the past, ALL of the 2.5 centers disappear. I don't use 5MHz bandwidth, and I usually lock the scan list on the SM down to the band the AP is operating in. So maybe that's why I was losing only a couple freqs. On 11/13/2014 9:12 PM, Ryan Ray via Af wrote: It's crazy. No warning, no release notes about it. How does this come out of all the betas and you lose your SM's because a frequency isn't checked... On Thu, Nov 13, 2014 at 7:09 PM, timothy steele via Af <[email protected]<mailto:[email protected]>> wrote: Yeah I noticed that same with 5Ghz looks like they unchecked the rarely used channels in SM with 13.2 programmer was probably thinking he was helping but lots are going to complain — Sent from Mailbox<https://www.dropbox.com/mailbox> On Thu, Nov 13, 2014 at 10:06 PM, Ryan Ray via Af <[email protected]<mailto:[email protected]>> wrote: Just did a >200 group of SM's and the upgrade has removed frequencies that were previously checked. I followed the guide and did the SM's first and AP's last. Luckily the majority of these can see another AP but what the fuck... About half of these SM's were on 13.2(34) and the other half were on 13.1.3... This is what it looks like after an update <image.png> Pre update they were all <image.png> URG
