I upgraded a 2.4 sector SM first to 13.2 and it did not reconnect to the tower until I upgraded the AP to 13.2 as well.
Allen Sent from my Ranch Phone On Nov 14, 2014, at 12:25 AM, Rajesh Vijayakumar via Af <[email protected]> wrote: > We looked at all the recent changes than went in to 13.2 but did not find > anything that would explain this behavior. Also tried to recreate it in the > lab on a 2.4 GHz setup, but the SM kept all the checked frequencies after > upgrade from 13.1.3 to 13.2. > > Has anyone else upgraded a 2.4 GHz sector and run into this issue (or did not > run into this issue)? > > Rajesh Vijayakumar > Cambium Networks > > > On Thu, Nov 13, 2014 at 10:45 PM, Aaron Schneider via Af <[email protected]> wrote: >> We are investigating the other issues, but with respect to 5767.5 and >> 5807.5, those two were affected by a bug fix, in that pre-13.2, 5767.5 was >> actually enabling 5767.20, due to an obvious typo in the scan list code, and >> 5807.5 was actually enabling 5807.00, due to another typo bug in the code. >> So correcting these two items may have left them unchecked on an upgrade to >> 13.2, but they weren’t valid scan frequencies anyways. >> >> >> >> These two updates didn’t make the release notes due to an oversight. These >> two frequency updates are in no way related to what is being reported for >> the 2.5MHz center channels coming back unchecked for 2.4. we are >> investigating. >> >> >> >> -Aaron >> >> >> >> From: Af [mailto:[email protected]] On Behalf Of George Skorup (Cyber >> Broadcasting) via Af >> Sent: Thursday, November 13, 2014 9:25 PM >> To: [email protected] >> Subject: Re: [AFMUG] 13.2 Issue (Removing frequency checkboxes) >> >> >> >> 13.2 on the SM definitely does not jive with build 32 on the AP. So.. don't >> do that. I forgot I still had that AP on build 32 until it was too late. SMs >> would pop in session for about 2 seconds and go down again. Luckily updating >> the AP to 13.2 official fixed it. >> >> I'm also seeing 5GHz SMs losing freqs. But it's funny, like 99% of them only >> lose 5767.5 and 5807.5. I try to avoid the 2.5 centers whenever I can since >> I've noticed exactly what you guys are seeing here in the past, ALL of the >> 2.5 centers disappear. I don't use 5MHz bandwidth, and I usually lock the >> scan list on the SM down to the band the AP is operating in. So maybe that's >> why I was losing only a couple freqs. >> >> On 11/13/2014 9:12 PM, Ryan Ray via Af wrote: >> >> It's crazy. No warning, no release notes about it. How does this come out of >> all the betas and you lose your SM's because a frequency isn't checked... >> >> >> >> On Thu, Nov 13, 2014 at 7:09 PM, timothy steele via Af <[email protected]> wrote: >> >> Yeah I noticed that same with 5Ghz looks like they unchecked the rarely used >> channels in SM with 13.2 programmer was probably thinking he was helping but >> lots are going to complain >> >> >> — >> Sent from Mailbox >> >> >> >> On Thu, Nov 13, 2014 at 10:06 PM, Ryan Ray via Af <[email protected]> wrote: >> >> Just did a >200 group of SM's and the upgrade has removed frequencies that >> were previously checked. I followed the guide and did the SM's first and >> AP's last. Luckily the majority of these can see another AP but what the >> fuck... >> >> >> >> About half of these SM's were on 13.2(34) and the other half were on >> 13.1.3... >> >> >> >> This is what it looks like after an update >> >> >> >> <image.png> >> >> >> >> >> >> Pre update they were all >> >> >> >> <image.png> >> >> >> >> >> >> URG >> >> >> >> >> >> >> >
