I know I said I was done for the night, but I'm going to update a 2.4
450 sector here shortly. It's on 2460/20MHz, so hopefully nothing bad
happens.
On 11/14/2014 12:25 AM, Rajesh Vijayakumar via Af wrote:
We looked at all the recent changes than went in to 13.2 but did not
find anything that would explain this behavior. Also tried to recreate
it in the lab on a 2.4 GHz setup, but the SM kept all the checked
frequencies after upgrade from 13.1.3 to 13.2.
Has anyone else upgraded a 2.4 GHz sector and run into this issue (or
did not run into this issue)?
Rajesh Vijayakumar
Cambium Networks
On Thu, Nov 13, 2014 at 10:45 PM, Aaron Schneider via Af <[email protected]
<mailto:[email protected]>> wrote:
We are investigating the other issues, but with respect to 5767.5
and 5807.5, those two were affected by a bug fix, in that
pre-13.2, 5767.5 was actually enabling 5767.20, due to an obvious
typo in the scan list code, and 5807.5 was actually enabling
5807.00, due to another typo bug in the code. So correcting these
two items may have left them unchecked on an upgrade to 13.2, but
they weren’t valid scan frequencies anyways.
These two updates didn’t make the release notes due to an
oversight. These two frequency updates are in no way related to
what is being reported for the 2.5MHz center channels coming back
unchecked for 2.4. we are investigating.
-Aaron
*From:*Af [mailto:[email protected]
<mailto:[email protected]>] *On Behalf Of *George Skorup (Cyber
Broadcasting) via Af
*Sent:* Thursday, November 13, 2014 9:25 PM
*To:* [email protected] <mailto:[email protected]>
*Subject:* Re: [AFMUG] 13.2 Issue (Removing frequency checkboxes)
13.2 on the SM definitely does not jive with build 32 on the AP.
So.. don't do that. I forgot I still had that AP on build 32 until
it was too late. SMs would pop in session for about 2 seconds and
go down again. Luckily updating the AP to 13.2 official fixed it.
I'm also seeing 5GHz SMs losing freqs. But it's funny, like 99% of
them only lose 5767.5 and 5807.5. I try to avoid the 2.5 centers
whenever I can since I've noticed exactly what you guys are seeing
here in the past, ALL of the 2.5 centers disappear. I don't use
5MHz bandwidth, and I usually lock the scan list on the SM down to
the band the AP is operating in. So maybe that's why I was losing
only a couple freqs.
On 11/13/2014 9:12 PM, Ryan Ray via Af wrote:
It's crazy. No warning, no release notes about it. How does
this come out of all the betas and you lose your SM's because
a frequency isn't checked...
On Thu, Nov 13, 2014 at 7:09 PM, timothy steele via Af
<[email protected] <mailto:[email protected]>> wrote:
Yeah I noticed that same with 5Ghz looks like they unchecked
the rarely used channels in SM with 13.2 programmer was
probably thinking he was helping but lots are going to complain
—
Sent from Mailbox <https://www.dropbox.com/mailbox>
On Thu, Nov 13, 2014 at 10:06 PM, Ryan Ray via Af
<[email protected] <mailto:[email protected]>> wrote:
Just did a >200 group of SM's and the upgrade has removed
frequencies that were previously checked. I followed the
guide and did the SM's first and AP's last. Luckily the
majority of these can see another AP but what the fuck...
About half of these SM's were on 13.2(34) and the other
half were on 13.1.3...
This is what it looks like after an update
<image.png>
Pre update they were all
<image.png>
URG
