Josh, Sure - let me know which one you need. I didn’t follow all of this thread.
Mark > On Nov 29, 2014, at 5:11 PM, Josh Luthman via Af <[email protected]> wrote: > > Would you mind shipping it to me? > > I can order one from Packetflux Monday and deliver it to your address? > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Sat, Nov 29, 2014 at 5:07 PM, Mark Radabaugh via Af <[email protected] > <mailto:[email protected]>> wrote: > I have a bunch of them in the shop if you need one. > > Mark Radabaugh > Amplex > 27800 Lemoyne, Ste F > Millbury, OH 43447 > 419-261-5996 <tel:419-261-5996> > > On Nov 29, 2014, at 4:55 PM, Josh Luthman via Af <[email protected] > <mailto:[email protected]>> wrote: > >> So I just got back...fuse popped on that SyncInjector. Not sure why. There >> was a Ubnt Beam on it - the cable was moved to the POE injector and fuse >> replaced. SyncInjector is working as expected right now. >> >> Sure hoping Forrest can do next day shipping on Monday =) >> >> >> Josh Luthman >> Office: 937-552-2340 <tel:937-552-2340> >> Direct: 937-552-2343 <tel:937-552-2343> >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Sat, Nov 29, 2014 at 3:39 PM, Forrest Christian (List Account) via Af >> <[email protected] <mailto:[email protected]>> wrote: >> See http://tickets.packetflux.com/kb/faq.php?id=2 >> <http://tickets.packetflux.com/kb/faq.php?id=2> >> >> 6 blinks = power missing/too low. >> >> And yes, you need a syncpipe. >> >> -forrest >> >> On Fri, Nov 28, 2014 at 6:46 PM, Josh Luthman via Af <[email protected] >> <mailto:[email protected]>> wrote: >> Here's a video, not sure what the blinking means? >> >> https://www.youtube.com/watch?v=dME8A-H_590 >> <https://www.youtube.com/watch?v=dME8A-H_590> >> >> >> Josh Luthman >> Office: 937-552-2340 <tel:937-552-2340> >> Direct: 937-552-2343 <tel:937-552-2343> >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Fri, Nov 28, 2014 at 8:39 PM, Josh Luthman via Af <[email protected] >> <mailto:[email protected]>> wrote: >> *rb2011 with ports 2/3/4/5 set to hardware switch (ether2 master, 3/4/5 >> slave). Ports 6/7/8/9 are hardware switch (ether6 master, 7/8/9 slave). >> *From the rb2011 it goes to the Ethernet half of the SyncInjector. >> *From the POE half of the SyncInjector it goes to WB gigeapc HV surge >> suppressors and then to the ePMP radios. >> >> Two of the ePMP radios are powered up and running gige. Neither are >> receiving CMM sync (top of the ePMP says "Not receiving GPS sync"). The >> remaining 6 APs aren't even powering up/linking up. Any ideas before I >> start swapping parts? Is it OK to have the surge between SyncInjectors and >> ePMP? >> >> On top of all of this the SiteMonitor isn't talking to the POE injector or >> the two Gig SyncInjectors. I have them all daisy chained and verified >> they're snapped in place. The POE injector is powering Ubnt radios just >> fine. >> >> Josh Luthman >> Office: 937-552-2340 <tel:937-552-2340> >> Direct: 937-552-2343 <tel:937-552-2343> >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> >> >
