I think just a syncpipe basic. It's just going to two syncinjectors. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Nov 29, 2014 7:10 PM, "Mark Radabaugh via Af" <[email protected]> wrote:
> Josh, > > Sure - let me know which one you need. I didn’t follow all of this > thread. > > Mark > > > On Nov 29, 2014, at 5:11 PM, Josh Luthman via Af <[email protected]> wrote: > > Would you mind shipping it to me? > > I can order one from Packetflux Monday and deliver it to your address? > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Sat, Nov 29, 2014 at 5:07 PM, Mark Radabaugh via Af <[email protected]> > wrote: > >> I have a bunch of them in the shop if you need one. >> >> Mark Radabaugh >> Amplex >> 27800 Lemoyne, Ste F >> Millbury, OH 43447 >> 419-261-5996 >> >> On Nov 29, 2014, at 4:55 PM, Josh Luthman via Af <[email protected]> wrote: >> >> So I just got back...fuse popped on that SyncInjector. Not sure why. >> There was a Ubnt Beam on it - the cable was moved to the POE injector and >> fuse replaced. SyncInjector is working as expected right now. >> >> Sure hoping Forrest can do next day shipping on Monday =) >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Sat, Nov 29, 2014 at 3:39 PM, Forrest Christian (List Account) via Af >> <[email protected]> wrote: >> >>> See http://tickets.packetflux.com/kb/faq.php?id=2 >>> >>> 6 blinks = power missing/too low. >>> >>> And yes, you need a syncpipe. >>> >>> -forrest >>> >>> On Fri, Nov 28, 2014 at 6:46 PM, Josh Luthman via Af <[email protected]> >>> wrote: >>> >>>> Here's a video, not sure what the blinking means? >>>> >>>> https://www.youtube.com/watch?v=dME8A-H_590 >>>> >>>> >>>> Josh Luthman >>>> Office: 937-552-2340 >>>> Direct: 937-552-2343 >>>> 1100 Wayne St >>>> Suite 1337 >>>> Troy, OH 45373 >>>> >>>> On Fri, Nov 28, 2014 at 8:39 PM, Josh Luthman via Af <[email protected]> >>>> wrote: >>>> >>>>> *rb2011 with ports 2/3/4/5 set to hardware switch (ether2 master, >>>>> 3/4/5 slave). Ports 6/7/8/9 are hardware switch (ether6 master, 7/8/9 >>>>> slave). >>>>> *From the rb2011 it goes to the Ethernet half of the SyncInjector. >>>>> *From the POE half of the SyncInjector it goes to WB gigeapc HV surge >>>>> suppressors and then to the ePMP radios. >>>>> >>>>> Two of the ePMP radios are powered up and running gige. Neither are >>>>> receiving CMM sync (top of the ePMP says "Not receiving GPS sync"). The >>>>> remaining 6 APs aren't even powering up/linking up. Any ideas before I >>>>> start swapping parts? Is it OK to have the surge between SyncInjectors >>>>> and >>>>> ePMP? >>>>> >>>>> On top of all of this the SiteMonitor isn't talking to the POE >>>>> injector or the two Gig SyncInjectors. I have them all daisy chained and >>>>> verified they're snapped in place. The POE injector is powering Ubnt >>>>> radios just fine. >>>>> >>>>> Josh Luthman >>>>> Office: 937-552-2340 >>>>> Direct: 937-552-2343 >>>>> 1100 Wayne St >>>>> Suite 1337 >>>>> Troy, OH 45373 >>>>> >>>> >>>> >>> >> > >
